FIJADOR EPOXY adheres firmly to many substrates (mortar, concrete, brick, stone, metals, wood, glass, synthetic materials, etc.) Immune to moisture in the air, FIJADOR EPOXY improves the cohesion and mechanical performance of the substrate, resists common chemical agents and hardens without shrinkage Solvent-free, FIJADOR EPOXY comes as a pre-measured kit including colourless resin (A) and hardener (B) FIJADOR EPOXY is used as a bond coat, impregnation primer and fixative for all resin or mortar on concrete and epoxy mortar.
Transparent epoxy resin primer and fixative for concrete, stone and wood: FIJADOR EPOXI-5 kg - ARCANE INDUSTRIES
227,60 €
+ Free ShippingIndoor and outdoor flooring.
Concrete: 1 coat of epoxy fixative from 200 to 300 g per m² depending on the porosity of the concrete. Possible addition of 150 g of silica HN31 to 300 g of epoxy fixative in case of concrete with imperfections (small holes), applied with a trowel in this case.Smooth concrete: Sandblast or shotblast with a minimum SA 2.5 minimum to obtain a roughness of 80-100 µ in Rt (ISO 8501-1) or roughen with a solution of Arcane cement film stripper diluted to 20% (20% stripper to 80% water). This ensures adequate penetration of the epoxy fixative and uniform film thickness. Wash the concrete thoroughly with a water jet and allow to dry after treatment. 1 epoxy fixative coat of 200 g per m². Steel: Sandblast or shotblast with a minimum SA 2.5 degree of care to obtain a roughness of 80-100 µ in Rt (ISO 8501-1). 1 coat of epoxy fixative 200 g per m².Wood: Degrease and dust the surfaces beforehand and repair non-adherent parts. 1 coat of epoxy fixative 200 g per m².Tiles: Sand to scratch the surface, degrease thoroughly and allow to dry before applying the epoxy fixative primer: 1 coat of 150 g per m².
Reviews
There are no reviews yet.